Are Henry Bags Re-Usable?.
In some cases, a Vax may overheat simply because it’s been used for an extended period of time..usually shouldn’t happen if the vacuum is functioning correctly, but may be the cause if you’ve been vacuuming for a long time without letting it cool down.. Switch off the vacuum and allow it to cool for 24 hours, then try using it again.
If the vacuum runs fine, then it may have just needed time to cool down.If the vacuum runs for a short time and then cuts out again, however, then there is another issue that needs to be fixed.. What If None of These Potential Issues Are Causing the Problem?.If your Vax vacuum is still cutting out after you’ve cleaned the filters, checked for blockages, and allowed the vacuum to cool down, then we recommend contacting Vax’s support team.
There may be an issue with the vacuum that requires professional repair..Some examples include:.
A damaged power cable that has a loose connection.. A faulty power switch.. A motor fault.. It’s important that any electrical issues are fixed by a licensed professional.
If your Vax is out of warranty, you could also try contacting a vacuum cleaner repair company.It’s important to clean it to prevent bad odours or bacterial growth.. To clean the canister, fully detach it from the vacuum, empty it, then use a dry microfibre cloth to remove any loose dirt.
Wash the canister in water with washing up liquid, before thoroughly rinsing it with cold water.. As always, make sure the bin is completely dry before you reattach it!.This step is much easier if you have a bagged vacuum, as you’ll just need to replace the old bag with a new one.
It’s still a good idea to wipe down the compartment holding the bag though..Never use a bagged vacuum without a bag, unless the manual says this is fine.